PaWasapi_GetDeviceRole @57
PaWasapi_ThreadPriorityBoost @58
PaWasapi_ThreadPriorityRevert @59
-PaWasapi_GetFramesPerHostBuffer @60
\ No newline at end of file
+PaWasapi_GetFramesPerHostBuffer @60
+PaWasapi_GetJackDescription @61
+PaWasapi_GetJackCount @62
\ No newline at end of file
PaWasapiDeviceRole;\r
\r
\r
+/* Jack connection type */\r
+typedef enum PaWasapiJackConnectionType\r
+{\r
+ eJackConnTypeUnknown,\r
+ eJackConnType3Point5mm,\r
+ eJackConnTypeQuarter,\r
+ eJackConnTypeAtapiInternal,\r
+ eJackConnTypeRCA,\r
+ eJackConnTypeOptical,\r
+ eJackConnTypeOtherDigital,\r
+ eJackConnTypeOtherAnalog,\r
+ eJackConnTypeMultichannelAnalogDIN,\r
+ eJackConnTypeXlrProfessional,\r
+ eJackConnTypeRJ11Modem,\r
+ eJackConnTypeCombination\r
+} \r
+PaWasapiJackConnectionType;\r
+\r
+\r
+/* Jack geometric location */\r
+typedef enum PaWasapiJackGeoLocation\r
+{\r
+ eJackGeoLocUnk = 0,\r
+ eJackGeoLocRear = 0x1, /* matches EPcxGeoLocation::eGeoLocRear */\r
+ eJackGeoLocFront,\r
+ eJackGeoLocLeft,\r
+ eJackGeoLocRight,\r
+ eJackGeoLocTop,\r
+ eJackGeoLocBottom,\r
+ eJackGeoLocRearPanel,\r
+ eJackGeoLocRiser,\r
+ eJackGeoLocInsideMobileLid,\r
+ eJackGeoLocDrivebay,\r
+ eJackGeoLocHDMI,\r
+ eJackGeoLocOutsideMobileLid,\r
+ eJackGeoLocATAPI,\r
+ eJackGeoLocReserved5,\r
+ eJackGeoLocReserved6,\r
+} \r
+PaWasapiJackGeoLocation;\r
+\r
+\r
+/* Jack general location */\r
+typedef enum PaWasapiJackGenLocation\r
+{\r
+ eJackGenLocPrimaryBox = 0,\r
+ eJackGenLocInternal,\r
+ eJackGenLocSeparate,\r
+ eJackGenLocOther\r
+} \r
+PaWasapiJackGenLocation;\r
+\r
+\r
+/* Jack's type of port */\r
+typedef enum PaWasapiJackPortConnection\r
+{\r
+ eJackPortConnJack = 0,\r
+ eJackPortConnIntegratedDevice,\r
+ eJackPortConnBothIntegratedAndJack,\r
+ eJackPortConnUnknown\r
+} \r
+PaWasapiJackPortConnection;\r
+\r
+\r
/* Thread priority */\r
typedef enum PaWasapiThreadPriority\r
{\r
PaWasapiThreadPriority;\r
\r
\r
+/* Stream descriptor. */\r
+typedef struct PaWasapiJackDescription \r
+{\r
+ unsigned long channelMapping;\r
+ unsigned long color; /* derived from macro: #define RGB(r,g,b) ((COLORREF)(((BYTE)(r)|((WORD)((BYTE)(g))<<8))|(((DWORD)(BYTE)(b))<<16))) */\r
+ PaWasapiJackConnectionType connectionType;\r
+ PaWasapiJackGeoLocation geoLocation;\r
+ PaWasapiJackGenLocation genLocation;\r
+ PaWasapiJackPortConnection portConnection;\r
+ unsigned int isConnected;\r
+}\r
+PaWasapiJackDescription;\r
+\r
+\r
/* Stream descriptor. */\r
typedef struct PaWasapiStreamInfo \r
{\r
PaError PaWasapi_GetFramesPerHostBuffer( PaStream *pStream, unsigned int *nInput, unsigned int *nOutput );\r
\r
\r
+/** Get number of jacks associated with a WASAPI device. Use this method to determine if\r
+ there are any jacks associated with the provided WASAPI device. Not all audio devices\r
+ will support this capability. This is valid for both input and output devices.\r
+ @param nDevice device index.\r
+ @param jcount Number of jacks is returned in this variable\r
+ @return Error code indicating success or failure\r
+ @see PaWasapi_GetJackDescription\r
+ */\r
+PaError PaWasapi_GetJackCount(PaDeviceIndex nDevice, int *jcount);\r
+\r
+\r
+/** Get the jack description associated with a WASAPI device and jack number\r
+ Before this function is called, use PaWasapi_GetJackCount to determine the\r
+ number of jacks associated with device. If jcount is greater than zero, then\r
+ each jack from 0 to jcount can be queried with this function to get the jack\r
+ description.\r
+ @param nDevice device index.\r
+ @param jindex Which jack to return information\r
+ @param KSJACK_DESCRIPTION This structure filled in on success.\r
+ @return Error code indicating success or failure\r
+ @see PaWasapi_GetJackCount\r
+ */\r
+PaError PaWasapi_GetJackDescription(PaDeviceIndex nDevice, int jindex, PaWasapiJackDescription *pJackDescription);\r
+\r
+\r
/*\r
IMPORTANT:\r
\r
#define COBJMACROS\r
#include <Audioclient.h>\r
#include <endpointvolume.h>\r
- #define INITGUID //<< avoid additional linkage of static libs, uneeded code will be optimized out\r
+ #define INITGUID // Avoid additional linkage of static libs, excessive code will be optimized out by the compiler\r
#include <mmdeviceapi.h>\r
#include <functiondiscoverykeys.h>\r
+ #include <devicetopology.h> // Used to get IKsJackDescription interface\r
#undef INITGUID\r
#endif\r
#ifndef __MWERKS__\r
PA_DEFINE_IID(IAudioRenderClient, f294acfc, 3146, 4483, a7, bf, ad, dc, a7, c2, 60, e2);\r
// "C8ADBD64-E71E-48a0-A4DE-185C395CD317"\r
PA_DEFINE_IID(IAudioCaptureClient, c8adbd64, e71e, 48a0, a4, de, 18, 5c, 39, 5c, d3, 17);\r
+// *2A07407E-6497-4A18-9787-32F79BD0D98F* Or this??\r
+PA_DEFINE_IID(IDeviceTopology, 2A07407E, 6497, 4A18, 97, 87, 32, f7, 9b, d0, d9, 8f);\r
+// *AE2DE0E4-5BCA-4F2D-AA46-5D13F8FDB3A9*\r
+PA_DEFINE_IID(IPart, AE2DE0E4, 5BCA, 4F2D, aa, 46, 5d, 13, f8, fd, b3, a9);\r
+// *4509F757-2D46-4637-8E62-CE7DB944F57B*\r
+PA_DEFINE_IID(IKsJackDescription, 4509F757, 2D46, 4637, 8e, 62, ce, 7d, b9, 44, f5, 7b);\r
// Media formats:\r
__DEFINE_GUID(pa_KSDATAFORMAT_SUBTYPE_PCM, 0x00000001, 0x0000, 0x0010, 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71 );\r
__DEFINE_GUID(pa_KSDATAFORMAT_SUBTYPE_ADPCM, 0x00000002, 0x0000, 0x0010, 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71 );\r
// Get API\r
PaWasapiHostApiRepresentation *paWasapi = _GetHostApi(&ret);\r
if (paWasapi == NULL)\r
- return ret;\r
+ return paNotInitialized;\r
\r
// Get device index\r
ret = PaUtil_DeviceIndexToHostApiDeviceIndex(&index, nDevice, &paWasapi->inheritedHostApiRep);\r
return paNoError;\r
}\r
\r
+// ------------------------------------------------------------------------------------------\r
+// Described at:\r
+// http://msdn.microsoft.com/en-us/library/dd371387(v=VS.85).aspx\r
+\r
+PaError PaWasapi_GetJackCount(PaDeviceIndex nDevice, int *jcount)\r
+{\r
+ PaError ret;\r
+ HRESULT hr = S_OK;\r
+ PaDeviceIndex index;\r
+ IDeviceTopology *pDeviceTopology = NULL;\r
+ IConnector *pConnFrom = NULL;\r
+ IConnector *pConnTo = NULL;\r
+ IPart *pPart = NULL;\r
+ IKsJackDescription *pJackDesc = NULL;\r
+ UINT jackCount = 0;\r
+\r
+ PaWasapiHostApiRepresentation *paWasapi = _GetHostApi(&ret);\r
+ if (paWasapi == NULL)\r
+ return paNotInitialized;\r
+\r
+ // Get device index.\r
+ ret = PaUtil_DeviceIndexToHostApiDeviceIndex(&index, nDevice, &paWasapi->inheritedHostApiRep);\r
+ if (ret != paNoError)\r
+ return ret;\r
+\r
+ // Validate index.\r
+ if ((UINT32)index >= paWasapi->deviceCount)\r
+ return paInvalidDevice;\r
+\r
+ // Get the endpoint device's IDeviceTopology interface.\r
+ hr = IMMDevice_Activate(paWasapi->devInfo[index].device, &pa_IID_IDeviceTopology, \r
+ CLSCTX_INPROC_SERVER, NULL, (void**)&pDeviceTopology);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // The device topology for an endpoint device always contains just one connector (connector number 0).\r
+ hr = IDeviceTopology_GetConnector(pDeviceTopology, 0, &pConnFrom);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Step across the connection to the jack on the adapter.\r
+ hr = IConnector_GetConnectedTo(pConnFrom, &pConnTo);\r
+ if (HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) == hr)\r
+ {\r
+ // The adapter device is not currently active.\r
+ hr = E_NOINTERFACE;\r
+ }\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Get the connector's IPart interface.\r
+ hr = IConnector_QueryInterface(pConnTo, &pa_IID_IPart, (void**)&pPart);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Activate the connector's IKsJackDescription interface.\r
+ hr = IPart_Activate(pPart, CLSCTX_INPROC_SERVER, &pa_IID_IKsJackDescription, (void**)&pJackDesc);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Return jack count for this device.\r
+ hr = IKsJackDescription_GetJackCount(pJackDesc, &jackCount);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Set.\r
+ (*jcount) = jackCount;\r
+\r
+ // Ok.\r
+ ret = paNoError;\r
+\r
+error:\r
+\r
+ SAFE_RELEASE(pDeviceTopology);\r
+ SAFE_RELEASE(pConnFrom);\r
+ SAFE_RELEASE(pConnTo);\r
+ SAFE_RELEASE(pPart);\r
+ SAFE_RELEASE(pJackDesc);\r
+\r
+ LogHostError(hr);\r
+ return paNoError;\r
+}\r
+\r
+// ------------------------------------------------------------------------------------------\r
+static PaWasapiJackConnectionType ConvertJackConnectionTypeWASAPIToPA(int connType)\r
+{\r
+ switch (connType)\r
+ {\r
+ case eConnTypeUnknown: return eJackConnTypeUnknown;\r
+ case eConnType3Point5mm: return eJackConnType3Point5mm;\r
+ case eConnTypeQuarter: return eJackConnTypeQuarter;\r
+ case eConnTypeAtapiInternal: return eJackConnTypeAtapiInternal;\r
+ case eConnTypeRCA: return eJackConnTypeRCA;\r
+ case eConnTypeOptical: return eJackConnTypeOptical;\r
+ case eConnTypeOtherDigital: return eJackConnTypeOtherDigital;\r
+ case eConnTypeOtherAnalog: return eJackConnTypeOtherAnalog;\r
+ case eConnTypeMultichannelAnalogDIN: return eJackConnTypeMultichannelAnalogDIN;\r
+ case eConnTypeXlrProfessional: return eJackConnTypeXlrProfessional;\r
+ case eConnTypeRJ11Modem: return eJackConnTypeRJ11Modem;\r
+ case eConnTypeCombination: return eJackConnTypeCombination;\r
+ }\r
+ return eJackConnTypeUnknown;\r
+}\r
+\r
+// ------------------------------------------------------------------------------------------\r
+static PaWasapiJackGeoLocation ConvertJackGeoLocationWASAPIToPA(int geoLoc)\r
+{\r
+ switch (geoLoc)\r
+ {\r
+ case eGeoLocRear: return eJackGeoLocRear;\r
+ case eGeoLocFront: return eJackGeoLocFront;\r
+ case eGeoLocLeft: return eJackGeoLocLeft;\r
+ case eGeoLocRight: return eJackGeoLocRight;\r
+ case eGeoLocTop: return eJackGeoLocTop;\r
+ case eGeoLocBottom: return eJackGeoLocBottom;\r
+ case eGeoLocRearPanel: return eJackGeoLocRearPanel;\r
+ case eGeoLocRiser: return eJackGeoLocRiser;\r
+ case eGeoLocInsideMobileLid: return eJackGeoLocInsideMobileLid;\r
+ case eGeoLocDrivebay: return eJackGeoLocDrivebay;\r
+ case eGeoLocHDMI: return eJackGeoLocHDMI;\r
+ case eGeoLocOutsideMobileLid: return eJackGeoLocOutsideMobileLid;\r
+ case eGeoLocATAPI: return eJackGeoLocATAPI;\r
+ }\r
+ return eJackGeoLocUnk;\r
+}\r
+\r
+// ------------------------------------------------------------------------------------------\r
+static PaWasapiJackGenLocation ConvertJackGenLocationWASAPIToPA(int genLoc)\r
+{\r
+ switch (genLoc)\r
+ {\r
+ case eGenLocPrimaryBox: return eJackGenLocPrimaryBox;\r
+ case eGenLocInternal: return eJackGenLocInternal;\r
+ case eGenLocSeparate: return eJackGenLocSeparate;\r
+ case eGenLocOther: return eJackGenLocOther;\r
+ }\r
+ return eJackGenLocPrimaryBox;\r
+}\r
+\r
+// ------------------------------------------------------------------------------------------\r
+static PaWasapiJackPortConnection ConvertJackPortConnectionWASAPIToPA(int portConn)\r
+{\r
+ switch (portConn)\r
+ {\r
+ case ePortConnJack: return eJackPortConnJack;\r
+ case ePortConnIntegratedDevice: return eJackPortConnIntegratedDevice;\r
+ case ePortConnBothIntegratedAndJack:return eJackPortConnBothIntegratedAndJack;\r
+ case ePortConnUnknown: return eJackPortConnUnknown;\r
+ }\r
+ return eJackPortConnJack;\r
+}\r
+\r
+// ------------------------------------------------------------------------------------------\r
+// Described at:\r
+// http://msdn.microsoft.com/en-us/library/dd371387(v=VS.85).aspx\r
+\r
+PaError PaWasapi_GetJackDescription(PaDeviceIndex nDevice, int jindex, PaWasapiJackDescription *pJackDescription)\r
+{\r
+ PaError ret;\r
+ HRESULT hr = S_OK;\r
+ PaDeviceIndex index;\r
+ IDeviceTopology *pDeviceTopology = NULL;\r
+ IConnector *pConnFrom = NULL;\r
+ IConnector *pConnTo = NULL;\r
+ IPart *pPart = NULL;\r
+ IKsJackDescription *pJackDesc = NULL;\r
+ KSJACK_DESCRIPTION jack = { 0 };\r
+\r
+ PaWasapiHostApiRepresentation *paWasapi = _GetHostApi(&ret);\r
+ if (paWasapi == NULL)\r
+ return paNotInitialized;\r
+\r
+ // Get device index.\r
+ ret = PaUtil_DeviceIndexToHostApiDeviceIndex(&index, nDevice, &paWasapi->inheritedHostApiRep);\r
+ if (ret != paNoError)\r
+ return ret;\r
+\r
+ // Validate index.\r
+ if ((UINT32)index >= paWasapi->deviceCount)\r
+ return paInvalidDevice;\r
+\r
+ // Get the endpoint device's IDeviceTopology interface.\r
+ hr = IMMDevice_Activate(paWasapi->devInfo[index].device, &pa_IID_IDeviceTopology, \r
+ CLSCTX_INPROC_SERVER, NULL, (void**)&pDeviceTopology);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // The device topology for an endpoint device always contains just one connector (connector number 0).\r
+ hr = IDeviceTopology_GetConnector(pDeviceTopology, 0, &pConnFrom);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Step across the connection to the jack on the adapter.\r
+ hr = IConnector_GetConnectedTo(pConnFrom, &pConnTo);\r
+ if (HRESULT_FROM_WIN32(ERROR_PATH_NOT_FOUND) == hr)\r
+ {\r
+ // The adapter device is not currently active.\r
+ hr = E_NOINTERFACE;\r
+ }\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Get the connector's IPart interface.\r
+ hr = IConnector_QueryInterface(pConnTo, &pa_IID_IPart, (void**)&pPart);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Activate the connector's IKsJackDescription interface.\r
+ hr = IPart_Activate(pPart, CLSCTX_INPROC_SERVER, &pa_IID_IKsJackDescription, (void**)&pJackDesc);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Test to return jack description struct for index 0.\r
+ hr = IKsJackDescription_GetJackDescription(pJackDesc, jindex, &jack);\r
+ IF_FAILED_JUMP(hr, error);\r
+\r
+ // Convert WASAPI values to PA format.\r
+ pJackDescription->channelMapping = jack.ChannelMapping;\r
+ pJackDescription->color = jack.Color;\r
+ pJackDescription->connectionType = ConvertJackConnectionTypeWASAPIToPA(jack.ConnectionType);\r
+ pJackDescription->genLocation = ConvertJackGenLocationWASAPIToPA(jack.GenLocation);\r
+ pJackDescription->geoLocation = ConvertJackGeoLocationWASAPIToPA(jack.GeoLocation);\r
+ pJackDescription->isConnected = jack.IsConnected;\r
+ pJackDescription->portConnection = ConvertJackPortConnectionWASAPIToPA(jack.PortConnection);\r
+\r
+ // Ok.\r
+ ret = paNoError;\r
+\r
+error:\r
+\r
+ SAFE_RELEASE(pDeviceTopology);\r
+ SAFE_RELEASE(pConnFrom);\r
+ SAFE_RELEASE(pConnTo);\r
+ SAFE_RELEASE(pPart);\r
+ SAFE_RELEASE(pJackDesc);\r
+\r
+ LogHostError(hr);\r
+ return ret;\r
+}\r
+\r
// ------------------------------------------------------------------------------------------\r
static HRESULT ProcessOutputBuffer(PaWasapiStream *stream, PaWasapiHostProcessor *processor, UINT32 frames)\r
{\r
--- /dev/null
+/** @file pa_test_jack_wasapi.c\r
+ @ingroup test_src\r
+ @brief Print out jack information for WASAPI endpoints\r
+ @author Reid Bishop <rbish@attglobal.net>\r
+*/\r
+/*\r
+ * $Id: pa_test_jack_wasapi.c 1368 2008-03-01 00:38:27Z rbishop $\r
+ *\r
+ * This program uses the PortAudio Portable Audio Library.\r
+ * For more information see: http://www.portaudio.com/\r
+ * Copyright (c) 1999-2010 Ross Bencina and Phil Burk\r
+ *\r
+ * Permission is hereby granted, free of charge, to any person obtaining\r
+ * a copy of this software and associated documentation files\r
+ * (the "Software"), to deal in the Software without restriction,\r
+ * including without limitation the rights to use, copy, modify, merge,\r
+ * publish, distribute, sublicense, and/or sell copies of the Software,\r
+ * and to permit persons to whom the Software is furnished to do so,\r
+ * subject to the following conditions:\r
+ *\r
+ * The above copyright notice and this permission notice shall be\r
+ * included in all copies or substantial portions of the Software.\r
+ *\r
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,\r
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF\r
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.\r
+ * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR\r
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF\r
+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION\r
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.\r
+ */\r
+\r
+/*\r
+ * The text above constitutes the entire PortAudio license; however, \r
+ * the PortAudio community also makes the following non-binding requests:\r
+ *\r
+ * Any person wishing to distribute modifications to the Software is\r
+ * requested to send the modifications to the original developer so that\r
+ * they can be incorporated into the canonical version. It is also \r
+ * requested that these non-binding requests be included along with the \r
+ * license above.\r
+ */\r
+#include <stdio.h>\r
+#include "portaudio.h"\r
+#include "pa_win_wasapi.h"\r
+\r
+\r
+/*\r
+* Helper function to determine if a given enum is present in mask variable\r
+*\r
+*/\r
+static int IsInMask(int val, int val2)\r
+{\r
+ return ((val & val2) == val2);\r
+}\r
+\r
+/*\r
+* This routine enumerates through the ChannelMapping for the IJackDescription\r
+*/\r
+\r
+static void EnumIJackChannels(int channelMapping)\r
+{\r
+ printf("Channel Mapping: ");\r
+ if(channelMapping == PAWIN_SPEAKER_DIRECTOUT)\r
+ {\r
+ printf("DIRECTOUT\n");\r
+ return;\r
+ }\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_FRONT_LEFT))\r
+ printf("FRONT_LEFT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_FRONT_RIGHT))\r
+ printf("FRONT_RIGHT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_FRONT_CENTER))\r
+ printf("FRONT_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_LOW_FREQUENCY))\r
+ printf("LOW_FREQUENCY, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_BACK_LEFT))\r
+ printf("BACK_LEFT, ");\r
+ if(IsInMask(channelMapping,PAWIN_SPEAKER_BACK_RIGHT))\r
+ printf("BACK_RIGHT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_FRONT_LEFT_OF_CENTER))\r
+ printf("FRONT_LEFT_OF_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_FRONT_RIGHT_OF_CENTER))\r
+ printf("FRONT_RIGHT_OF_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_BACK_CENTER))\r
+ printf("BACK_CENTER, ");\r
+ if(IsInMask(channelMapping,PAWIN_SPEAKER_SIDE_LEFT))\r
+ printf("SIDE_LEFT, ");\r
+ if(IsInMask(channelMapping,PAWIN_SPEAKER_SIDE_RIGHT))\r
+ printf("SIDE_RIGHT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_CENTER))\r
+ printf("TOP_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_FRONT_LEFT))\r
+ printf("TOP_FRONT_LEFT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_FRONT_CENTER))\r
+ printf("TOP_FRONT_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_FRONT_RIGHT))\r
+ printf("TOP_FRONT_RIGHT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_BACK_LEFT))\r
+ printf("TOP_BACK_LEFT, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_BACK_CENTER))\r
+ printf("TOP_BACK_CENTER, ");\r
+ if(IsInMask(channelMapping, PAWIN_SPEAKER_TOP_BACK_RIGHT))\r
+ printf("TOP_BACK_RIGHT, ");\r
+\r
+ printf("\n");\r
+}\r
+\r
+/*\r
+* This routine enumerates through the Jack Connection Types enums for IJackDescription\r
+*/\r
+static void EnumIJackConnectionType(int cType)\r
+{\r
+ printf("Connection Type: ");\r
+ switch(cType)\r
+ {\r
+ case eJackConnTypeUnknown:\r
+ printf("eJackConnTypeUnknown");\r
+ break;\r
+ case eJackConnType3Point5mm:\r
+ printf("eJackConnType3Point5mm");\r
+ break;\r
+ case eJackConnTypeQuarter:\r
+ printf("eJackConnTypeQuarter");\r
+ break;\r
+ case eJackConnTypeAtapiInternal:\r
+ printf("eJackConnTypeAtapiInternal");\r
+ break;\r
+ case eJackConnTypeRCA:\r
+ printf("eJackConnTypeRCA");\r
+ break;\r
+ case eJackConnTypeOptical:\r
+ printf("eJackConnTypeOptical");\r
+ break;\r
+ case eJackConnTypeOtherDigital:\r
+ printf("eJackConnTypeOtherDigital");\r
+ break;\r
+ case eJackConnTypeOtherAnalog:\r
+ printf("eJackConnTypeOtherAnalog");\r
+ break;\r
+ case eJackConnTypeMultichannelAnalogDIN:\r
+ printf("eJackConnTypeMultichannelAnalogDIN");\r
+ break;\r
+ case eJackConnTypeXlrProfessional:\r
+ printf("eJackConnTypeXlrProfessional");\r
+ break;\r
+ case eJackConnTypeRJ11Modem:\r
+ printf("eJackConnTypeRJ11Modem");\r
+ break;\r
+ case eJackConnTypeCombination:\r
+ printf("eJackConnTypeCombination");\r
+ break;\r
+ }\r
+ printf("\n");\r
+}\r
+\r
+/*\r
+* This routine enumerates through the GeoLocation enums for the IJackDescription\r
+*/\r
+static void EnumIJackGeoLocation(int iVal)\r
+{\r
+ printf("Geometric Location: ");\r
+ switch(iVal)\r
+ {\r
+ case eJackGeoLocRear:\r
+ printf("eJackGeoLocRear");\r
+ break;\r
+ case eJackGeoLocFront:\r
+ printf("eJackGeoLocFront");\r
+ break;\r
+ case eJackGeoLocLeft:\r
+ printf("eJackGeoLocLeft");\r
+ break;\r
+ case eJackGeoLocRight:\r
+ printf("eJackGeoLocRight");\r
+ break;\r
+ case eJackGeoLocTop:\r
+ printf("eJackGeoLocTop");\r
+ break;\r
+ case eJackGeoLocBottom:\r
+ printf("eJackGeoLocBottom");\r
+ break;\r
+ case eJackGeoLocRearPanel:\r
+ printf("eJackGeoLocRearPanel");\r
+ break;\r
+ case eJackGeoLocRiser:\r
+ printf("eJackGeoLocRiser");\r
+ break;\r
+ case eJackGeoLocInsideMobileLid:\r
+ printf("eJackGeoLocInsideMobileLid");\r
+ break;\r
+ case eJackGeoLocDrivebay:\r
+ printf("eJackGeoLocDrivebay");\r
+ break;\r
+ case eJackGeoLocHDMI:\r
+ printf("eJackGeoLocHDMI");\r
+ break;\r
+ case eJackGeoLocOutsideMobileLid:\r
+ printf("eJackGeoLocOutsideMobileLid");\r
+ break;\r
+ case eJackGeoLocATAPI:\r
+ printf("eJackGeoLocATAPI");\r
+ break;\r
+ }\r
+ printf("\n");\r
+}\r
+\r
+/*\r
+* This routine enumerates through the GenLocation enums for the IJackDescription\r
+*/\r
+static void EnumIJackGenLocation(int iVal)\r
+{\r
+ printf("General Location: ");\r
+ switch(iVal)\r
+ {\r
+ case eJackGenLocPrimaryBox:\r
+ printf("eJackGenLocPrimaryBox");\r
+ break;\r
+ case eJackGenLocInternal:\r
+ printf("eJackGenLocInternal");\r
+ break;\r
+ case eJackGenLocSeparate:\r
+ printf("eJackGenLocSeparate");\r
+ break;\r
+ case eJackGenLocOther:\r
+ printf("eJackGenLocOther");\r
+ break;\r
+ }\r
+ printf("\n");\r
+}\r
+\r
+/*\r
+* This routine enumerates through the PortConnection enums for the IJackDescription\r
+*/\r
+static void EnumIJackPortConnection(int iVal)\r
+{\r
+ printf("Port Type: ");\r
+ switch(iVal)\r
+ {\r
+ case eJackPortConnJack:\r
+ printf("eJackPortConnJack");\r
+ break;\r
+ case eJackPortConnIntegratedDevice:\r
+ printf("eJackPortConnIntegratedDevice");\r
+ break;\r
+ case eJackPortConnBothIntegratedAndJack:\r
+ printf("eJackPortConnBothIntegratedAndJack");\r
+ break;\r
+ case eJackPortConnUnknown:\r
+ printf("eJackPortConnUnknown");\r
+ break;\r
+ }\r
+ printf("\n");\r
+}\r
+\r
+/*\r
+* This routine retrieves and parses the KSJACK_DESCRIPTION structure for\r
+* the provided device ID.\r
+*/\r
+static PaError GetJackInformation(int deviceId)\r
+{\r
+ PaError err;\r
+ int i;\r
+ int jackCount = 0;\r
+ PaWasapiJackDescription jackDesc;\r
+\r
+ err = PaWasapi_GetJackCount(deviceId, &jackCount);\r
+ if( err != paNoError ) return err;\r
+\r
+ fprintf( stderr,"Number of Jacks: %d \n", jackCount );\r
+\r
+ for( i = 0; i<jackCount; i++ )\r
+ {\r
+ fprintf( stderr,"Jack #%d:\n", i );\r
+\r
+ err = PaWasapi_GetJackDescription(deviceId, i, &jackDesc);\r
+ if( err != paNoError ) \r
+ {\r
+ fprintf( stderr,"Failed getting description." );\r
+ continue;\r
+ }\r
+ else\r
+ {\r
+ printf("Is connected: %s\n",(jackDesc.isConnected)?"true":"false");\r
+ EnumIJackChannels(jackDesc.channelMapping);\r
+ EnumIJackConnectionType(jackDesc.connectionType);\r
+ EnumIJackGeoLocation(jackDesc.geoLocation);\r
+ EnumIJackGenLocation(jackDesc.genLocation);\r
+ EnumIJackPortConnection(jackDesc.portConnection);\r
+ printf("Jack Color: 0x%06X\n", jackDesc.color);\r
+ printf("\n");\r
+ }\r
+ }\r
+ return 0;\r
+}\r
+\r
+\r
+/*******************************************************************/\r
+int main(void);\r
+int main(void)\r
+{\r
+ PaError err;\r
+ const PaDeviceInfo *device;\r
+ int i;\r
+ int jackCount = 0;\r
+ int isInput = 0;\r
+\r
+ printf("PortAudio Test: WASAPI Jack Configuratin");\r
+ err = Pa_Initialize();\r
+ if( err != paNoError ) goto error;\r
+\r
+ /* Find all WASAPI devices */\r
+ for( i = 0; i < Pa_GetDeviceCount(); ++i )\r
+ {\r
+ device = Pa_GetDeviceInfo(i);\r
+ if( Pa_GetDeviceInfo(i)->hostApi == Pa_HostApiTypeIdToHostApiIndex(paWASAPI) )\r
+ {\r
+ if( device->maxOutputChannels == 0 )\r
+ {\r
+ isInput = 1;\r
+ }\r
+ printf("------------------------------------------\n");\r
+ printf("Device: %s",device->name);\r
+ if(isInput)\r
+ printf(" (Input) %d Channels\n",device->maxInputChannels);\r
+ else\r
+ printf(" (Output) %d Channels\n",device->maxOutputChannels);\r
+ // Try to see if this WASAPI device can provide Jack information\r
+ err = GetJackInformation(i);\r
+ if( err != paNoError ) goto error;\r
+ }\r
+ }\r
+ Pa_Terminate();\r
+ printf("Test finished.\n");\r
+ return err;\r
+\r
+error:\r
+ Pa_Terminate();\r
+ fprintf( stderr, "An error occured while using the portaudio stream\n" );\r
+ fprintf( stderr, "Error number: %d\n", err );\r
+ fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );\r
+ return err;\r
+}\r
projects / portaudio / commitdiff